cornhole

DIY Cornhole Boards, Part 2: Reverse Stain

With my cornhole boards built and my classic Woodie concept nailed down, I set out to do the fun part: paint! 

This portion of the project presented a unique challenge, one I'd never encountered even after 30 plus years of painting. I knew I wanted to achieve a 2-toned lacquered look on the face of my boards, but the glaring question was how? Since wood stain absorbs into the grain, (i.e., stain bleeds once applied) how was I to go about applying my hibiscus graphic to the boards and achieve the nice clean lines I was hoping for? 

First, we cut out the hibiscus parts from our paper image, and used the remaining stencil to draw the outlined parts on some special sticky paper.

This next part proved to be tricky, since you have one chance to position the sticker after removing the backing. When it makes contact with the plywood panel surface, pulling it back off can irreparably damage the plywood. So we taped the original stencil image outline to the cornhole board, which showed us exactly where to stick each piece, on both boards.   

Finally, we set up a ‘spray station’ outside, and sprayed the stain using a commercial HVLP system.  Any other method would apply too much stain to the surface. The stain could migrate underneath the sticky paper, and ruin any hope of straight edges on our hibiscus design. 

Once the spray application was completed, we let the surfaces dry overnight.

The climax of the operation came the next day, as we removed the stain-coated sticky paper from the cornhole board surfaces.  This was make or break time.

By slowly peeling the adhesive at a 45º angle, the paper came off smoothly and cleanly. 

The boards looked great, all the image edges nice and straight!  

But still, for this much work, the boards looked a little bit understated. They needed one last touch to look finished. 

Next time: Part 3, Adding Classic California Woodie Paint and Clear Coats


Do you have a painting project you'd like to get in touch with us about?
Contact us for a free quote at steve@advancepainting.com

DIY Cornhole Boards, Part 1

"Hey, you wanna play Cornhole?”  I was almost afraid to find out what that meant, on a recent summer vacation.  But once I started playing the popular beanbag toss game with our nieces and nephews, I was hooked.  Hated the name, love the game. I had to have my own set.

I found an easy to follow tutorial on building the game on the web, and proceeded to build two 2’x4’ boxes with the customary 6” target holes perfectly placed.

Once built, the boards looked like something I was forced to enjoy at YMCA summer camp. The generic plywood needed a little sprucing up. And since custom paint is my specialty, why not start there?

So I set out to find the perfect graphic element to emblazon on my boards. NFL logo? American flag? Too commonplace.

After scouring the web for ideas, I decided to draw inspiration from the classic wood-paneled Woodie. The gorgeous 2-toned lacquered wood against a candy colored paint job was just the kind of paint challenge I could sink my teeth into.

photo credit:  La vie en rose

photo credit: La vie en rose

I enlisted the help of my graphics-savvy daughter and made a couple of jumbo-sized prints of a simple hibiscus emblem at a local copy shop. I chose the perfect wood stain color, and had just the right shade of mint green custom paint mixed at my local Sherwin Williams.

With my boards built and my essential tools and paint supplies in hand, now the real fun could begin.

Next Time:  DIY Cornhole Boards Part 2 - Creating a Reverse Stain Image


Do you have a painting project you'd like to get in touch with us about?
Contact us for a free quote at steve@advancepainting.com